Care and Maintenance for your Vinyl Replacement Windows

Care and Maintenance for your Vinyl Replacementand on the balance shoe track of a double hung
Windowsvinyl window. This will keep the operation of the
Cleaning and care of your vinyl replacementvinyl window smooth without leaving oily residues
windows is a simple procedure that can keepthat tends to collect more abrasive elements.
your windows with a permanent new look.Do's and Don'ts for your vinyl windows
If you find any tape or labels on your windowDo's to know about vinyl windows:
that did not come off completely use an alcohol- Do open the bottom and Top window for
based cleaner on small glass areas only. When youimproved air ventilation.
are done with the removal process make sure- Do use both hands to hold the window when it
you thoroughly wet the glass and rinse with plainis tilting inward for cleaning
water.- Do always support the inward tilted windows
Ammonia-based glass cleaners or regular glasswhen they are in the cleaning position
cleaners can be used to clean the glass.- Do make sure that the tilt latches are fully
Refrain from using any solvents, paint removersengaged after you are done cleaning and bringing
or sharp objects to clean your windows and patiothe window in its original position.
doors. PVC (vinyl) products should be cleaned with- Do make sure you have your top window
mild soap and water.(double-hung) moved all the way up before you
In the event of heavier cleaning is needed usetry to lock your window.
commercially advertised household cleaners thatDon'ts to know about vinyl windows:
are non abrasive.- Don't forget to leave your lock in the open
Should your window have condensation on theposition until your windows are closed and ready
inside of your window, try to control the overallto be locked. Leaving the lock in the locked
humidity in your home. This is your responsibilityposition while the window is open can damage the
and has nothing to do with the quality of thekeeper when you attempt to close it.
window. The only time the manufacturer should- Don't try to remove the windows on a double
be responsible is when the condensation is visiblehung vinyl window
between the glass panes. This is a good indicator- Don't use WD40 or other oil based lubricants,
that the seal has been broken and the glass packthey only attract dirt. Silicon spray should be used
has to be replaced.for lubrication.
Mildew can become a problem when the humidity- Don't leave the center section of a Swing &
is too high for a long period of time and should beClean sliding vinyl window open without the proper
removed with an appropriate cleaner or mildewsupport or you will risk damaging the functionality
controller that can be acquired at your local store.of your window.
Vinyl windows are solid in color throughout making- Don't try to move sliding window sash of a
painting and varnishing a thing of the past. Keep inSwing & Clean when the pivot hardware is locked.
mind by doing so you will most likely void your- Don't use cleaners that are abrasive to clean the
warranty.vinyl or the glass of the windows
Also remember that the tracks of sliding and- Don't use any solvents to clean the windows
double-hung windows are exposed to outside- Don't forget to unlock your casement windows
environment, which can leave abrasive elementsbefore operating the crank to open them up
such as dirt, leaves, sand, grease, soot, etc. in- Don't use a high pressure hose to clean the
them. If not removed they can cause groves inoutside of a vinyl window
the vinyl tracks when operated. It is- Don't forget to add enough support to your
recommended to clean them semi-annual. Use avinyl window when installing a window air
small, stiff nylon brush for cleaning and a softconditioning unit
cloth to wipe them down. If needed use silicone- DON'T PAINT OR VARNISH vinyl windows! This
spray lubricant on the tracks of the sliding windowwill void your warranty.